Operator : Good morning, ladies and gentlemen. My name is Gerald, and I am your conference facilitator today. I would like to welcome everyone to Cleveland-Cliffs Second Quarter 2026 Earnings Conference Call. [Operator Instructions] The company reminds you that certain comments made on today's call will include predictive statements that are intended to be made as forward-looking within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. Although the company believes that its forward-looking statements are based on reasonable assumptions, such statements are subject to risks and uncertainties that can cause actual results to differ materially. Important factors that can cause results to differ materially are set forth in reports on Forms 10-K, and 10-Q and news releases filed with the SEC, which are available on the company's website. Today's conference call is also available on being broadcast at clevelandcliffs.com. At the conclusion of the call, it will be archived on the website and available for replay. The company will also discuss results excluding certain special items. Reconciliation for Regulation G purposes can be found in the earnings release, which was published this morning. At this time, I would like to introduce Lourenco Goncalves, Chairman and Chief Executive Officer.
Lourenco Goncalves : Thank you, Gary, and good morning to everyone. After several quarters of talking about the future earnings power of this company, we can finally point to tangible evidence that the progression we have been forecast is now reality. During the second quarter, we returned to positive free cash flow and tripled our adjusted EBITDA from the first quarter. While the second quarter represents meaningful progress, it still understates where this company is headed over the coming quarters. Q2 maintenance outages and our lagged contracts still did not allow us to demonstrate the full capability of our asset base. That will be more visible in Q3, in which we are expecting to more than double our Q2 EBITDA. Due to our health backlog and improved pricing, the second half of 2026 will look substantially better than the first half of the year. With our third quarter adjusted EBITDA guidance of $575 million, we have a situation where higher prices, lower costs and higher shipping volumes will all be converging at once. Weather-related impacts are behind us. finishing lines are full and pricing remains strong. Better yet, at the current curve for steel, we expect the fourth quarter to further outperform the third quarter in adjusted EBITDA, with even more improvements to come in 2027. When profits were below our standard at this time last year, I laid out three key areas of improvement that would bring us back to a respectable level. Automotive volume recovered, footprint optimization and the expiration of the uneconomic [ lab ] supply contract we had in place with [ Arcelor Middle ] coverage. These three factors have all now materialized. And with stronger pricing, the improvements we see are even better than previously forecasted. Automotive demand deserves a special [ mission ]. Cliffs continues to be the supplier of choice for the automotive sector in the United States, illustrated by the fact that we have received the top supplier award from both Toyota and General Motors so far this year. During the quarter, our shipments of steel to our automotive clients were the highest in the last 2 years. Our finishing lines, which to run at suboptimal utilization levels for the last couple of years, are now back to running at a healthy level of utilization with a favorable impact on our costs. Thanks to our multiyear contracting strategy, the ongoing reshoring of automotive production into the United States, a major supply chain disruption suffered by competitors, our automotive coating volumes are back to the strong levels we saw back in 2023. This improving situation in both steel and automotive demand can be attributed to the long overdue trade policies we now have in place in the United States. Section 232 has been the single most effective industrial policy implemented in our country in a generation. We applaud President Trump Secretary, Howard Lutnick and USTR Ambassador [ Jamison Greer ] for their conviction in these policies. The results are visible. Manufacturing investment is accelerating, domestic steel utilization is improving, and capital is being allocated to U.S.-based production rather than offshore production. The reshoring movement that's now occurring throughout American manufacturing simply would not be happening at its current scale, without Section 232, and they enforce mechanisms that support it. We have long argued that America cannot maintain a strong manufacturing base without maintaining our strongest steel industry. Today, that argument is no longer theoretical and has been validated by real-world investment decisions made by some of the largest companies in the world into automotive production, electrical infrastructure and defense-related applications among several other sectors. All of those investments require steel. And Cleveland-Cliffs is uniquely positioned to meet that demand, given the breadth of our product portfolio and our domestic footprint. Besides their great success in combating illegal trade of dump steel and steel derivatives into the United States, the U.S. government has been instrumental in making our industry more energy-efficient via grant from the Department of Energy. Our [ bottler ] works induction reheat furnace upgrade continues to progress well and upon completion in 2028, will provide us with the ability to supply more tons of the high-end grain-oriented electrical steels our country needs. In addition, we have made major progress on the rescoping of the [ Middletown ] project in compliance with the Trump administration's energy dominance goals. The [ Middletown ] blast furnace is due for a reline by 2030. And this DOE grant will allow us to go further in optimizing the furnace and maximizing energy efficiency by capturing and using blast furnace gas to generate electricity on-site. We expect to make a public announcement in the next months or so. Furthermore, as discussions surrounding USMCA continue, every outcome that has been publicly discussed would be a positive outcome for domestic steel producers. Whether the final result includes stronger [ melt and poor ] requirements, tighter enforcement of rules of origin, increased verification requirements, additional scrutiny of transshipped material or stronger content requirements for automotive production; each one of those outcomes favors is still produced in North America by companies with meaningful domestic operations. We are uniquely positioned because we are here in the United States of America, and we are miners, pellet producers, iron makers, steelmakers and downstream manufacturers. Therefore, every policy that emphasize domestic content, domestic production and domestic manufacturing directly benefits Cleveland-Cliffs. A similar trade dynamics applies to Canada. We were pleased to see the extension of the Canadian tariff rate quota system through June of 2027. Canada has struggled with many of the same challenges faced by the United States prior to President Trump. The world has way too much in steel-making capacity, and certain countries continue to export that excess capacity at prices disconnected from economic reality. Our Stelco results have improved and their contribution to Cleveland-Cliffs is part of our second half improved guidance. While we have seen improvements on the hot-rolled side, which the vast majority of what we do in Canada, on the finishing side, Stelco is still lagging. Without further measures to protect fair trade in Canada the future competitiveness of our galvanizing lines in [ Ramita ] is at risk. We continue to defend our point of view with the Canadian government officials asking them to do what is right to protect this industry in Canada, just as our American government has done here in the United States. Extending the [ TRQ ] system through June of 2027 is an important step toward protecting Canadian jobs and creating a healthier North American steel market, but it's not sufficient. If Canada really wants to have a domestic steel industry more needs to be done. One other matter to highlight in today's call is our Cleveland-Cliffs safety record, including Stelco. I don't talk publicly about safety very often, but we have worked very diligently since the 2 acquisitions of [ AKS and ArceloMittal ] back in 2020 to implement in our steel plants the same level of Cleveland-Cliffs safety standards we put in place in our minds since we took office in 2014. In fact, our total recordable injury rate for the last 3 years has been best in class. Safety is also good business practice. Because of our sustained safety performance over multiple years, we are now seeing meaningful reduction in workers' compensation expense and other related costs. One important item to mention today, we have officially kicked off negotiations with the [ United ] Workers Union to renew our collective bargain agreement. And I'm pleased to say that the process is off to a constructive and productive start. We are approaching these negotiations like we always do. with a shared commitment to maintaining a competitive and sustainable business while continuing to create opportunities for our employees. Based on the dialogue to date, we are confident that we can reach an agreement that strengthens our partnership and delivers meaningful benefit for both Cliffs and the USW. Before turning it over, I would like to recognize Celso's appointment to our Board of Directors as President and CFO that was announced this morning. This appointment formally reflects the role that he has already been playing in driving our strategy and delivering important financial accomplishments over the past decade. Sales has been an dispensable partner to me and a trusted leader across our organization, and this promotion better reflects his role. It also marks the early stages of a transition in leadership. I'm not going anywhere anytime soon, and I plan to lead this company for several more years with Celso as my right hand. With that introduction, I will turn it over to him.
Celso Goncalves : Thank you, and good morning, everyone. First, I'm grateful for the opportunity and the responsibility that the Board has given to me. I'm excited about where we sit today, especially considering the amount of improvement we have seen over the last year, combined with our promising outlook. There's a lot more that we can improve upon, and I'm confident that we can make it happen as the need for integrated steelmaking in North America is undeniable. Turning to our quarterly results, our adjusted EBITDA in the second quarter was $286 million, our best quarter in 2 years. Second quarter shipments were just over 4 million tons, down sequentially from the previous quarter due to the maintenance outages we underwent during the quarter as well as improved automotive demand, which comes with longer lead times. We expect to see steel shipment volumes above 4.3 million tons in the third quarter as the order book remains strong and backlogs are extended. Pricing also continued its steady climb upward. Our average selling price increased by $76 per ton as pricing lags started to materialize and we sold a richer product mix, thanks to our automotive-heavy order book. This climb will continue into Q3 as we have visibility on pricing on nearly every ton we will ship in the next quarter. Based on this, we expect our average price to increase another $55 per ton in Q3. HRC spot pricing has, of course, played the largest role in our improvements, but the trajectory of the cold-rolled coil price, which many of our contracts are linked to, has even further outpaced hot-rolled coil prices over the past several months. This is another factor illustrating the importance of trade policy as it has driven our pricing realizations to higher than originally expected levels. As for unit costs, as previously guided, the inventory lag effect from last quarter and our maintenance outages pushed costs up quarter-over-quarter. But with that behind us, we should see a $10 per ton reduction in costs into Q3. After 2 years of negative free cash flow, we finally flipped back to positive in the second quarter. We expect this trend to continue going forward. On top of that, we are now under contract on all of our major property sales with earnest money in our control in all cases. The bulk of the $400 million proceeds from our property sales are expected to come in the second half of this year. With volume, price and cost all moving in the right direction into next quarter, we felt it's prudent to provide an adjusted EBITDA guide with our results this time because of the magnitude of the change quarter-over-quarter. We expect adjusted EBITDA of approximately $575 million in the third quarter, which would be our strongest quarter in 3 years. With where the curve for HRC stands today, we would expect even further improvement on that figure in the fourth quarter, even with the typical seasonal slowdown we usually see around the holidays. Beyond this, if you ran out the futures curve over the next year, we would expect to hit our leverage target of sub 2.5x by this time next year as the cash flows generated from both ongoing profit and asset sales will be used to delever over that time frame. These are not based on any extraordinary assumptions, as we see achievable opportunities going into 2027 beyond just commodity pricing. We'll have an opportunity in the coming months to reset a large portion of our fixed price contracts substantially higher which we estimate will represent a $500 million EBITDA improvement year-over-year. We also see a major improvement coming from Stelco based on where its order book is today. as well as further cost reduction opportunities from AI-based initiatives currently being implemented with our partner, Palantir. On the strategic front, one thing that has become increasingly apparent through the multiple processes that we've run is that prospective counterparties approach discussions with the assumption that Cleveland-Cliffs was under pressure to transact. This includes our processes for [ HBI and FPT ] as well as our ongoing dialogue with [ POSCO ]. We went into these processes with the backdrop of foreign companies paying enticing multiples for U.S. industrial assets. These were opportunistic ventures aimed at unlocking value at higher multiples than where we trade at. We understand the replacement costs associated with these operations, and we are well aware that these assets -- what these assets contribute to Cleveland-Cliffs. So far, the offers that we have received related to these processes have fallen short of our value threshold. On top of that, our [ HBI ] has become substantially more valuable for us with the strong order book that we have in place. HBI used in blast furnaces juices our iron-making capabilities where we are constrained, and we have been able to push more volume through our mills as a result. This will be evident in our third quarter shipping volumes. Regarding [ POSCO ] specifically, discussions still remain friendly and ongoing, but we don't have a deadline on our side. We continue to have constructive dialogue and believe that there are strategic benefits that could be realized, but valuation and structure are important, and we're not desperate to do anything unless these two factors are met by [ POSCO ] and acceptable to us. The United States is the best market in the world, and it's not cheap to play in our sandbox. The story today is very simple. Cleveland-Cliffs is entering the strongest earnings environment that we have seen in years. and we are doing so with a better operating footprint in the domestic steel market that remains supported by trade enforcement and manufacturing investment. There are still low-hanging fruit opportunities such as fixed-price contract resets that can amplify our position even further, and we are anxious to pursue this in the coming months. The factors that have delayed our earnings recovery are largely behind us, while the factors that support future earnings remain firmly in place. With that, let's open up the line for questions.
Carlos de Alba : Franco I wonder if you can maybe give us a little bit more color on the resetting of the non-auto fixed-price contracts. Any specific products to which this apply? And should that come on January 1 or it will be throughout the year? And if you could maybe also share any light on the auto contracts for next year? Any expected reset higher or flat, that will be quite useful. .
Lourenco Goncalves : Carlos, regarding the resetting of the [ no ] automotive contract, it's a process that starts in earnest in the second half of this year. And it usually goes through November, early December will be done for the year. You know the numbers. You know the the current scenario on pricing and the futures curve and everything. So we negotiated last year contracts on the backdrop of a much lower price environment. So without giving any numbers on that, the expectation that these contracts were reset for much higher prices are just a foregone conclusion. So no surprise on that. Regarding automotive, we remember that we are in an environment right now that it's clear after a couple of years of changes in the marketplace and the dynamics of the marketplace, including ownership of more direct competitors, that we are the real deal in supplying automotive clients. And the clients know that, recognize that. And at this time around, there's no more escape valve, thanks to the beautiful enforcement of trade policies by the Trump administration. There is no more escape valve in Mexico for transship steel. There's no more Canada playing at convenience as part of the United States when it's good for Canada, but never when it's good for the United States. So all these things changed. Now all you are here in the United States or you're out. And if we're here in the United States, you want to produce cars in the United States, they need to buy from Cleveland-Cliffs. There is no more conversation about mini mills produced automotive steel or going into producing all kinds of automotive students, it's behind us. There is no more conversations that the other integrated player is at our level, they are not. We are getting market share from them at [ wheel ]. And if we want to take all their business, we take all their business. So we are in good shape, and we are going to play for higher prices. We're going to be more selective. And we are going to reset this number higher numbers higher. That's the bottom line.
Carlos de Alba : Perfect. And just on cost, so we saw the guidance for the third quarter. Any early comments on the fourth quarter expectations for cost? Should we maybe bake in another quarter-on-quarter reduction in the fourth quarter? Or is it going to be more flattish? And any comments would be great.
Lourenco Goncalves : Yes, we expect further improvements. Our momentum is good, and we believe that with higher levels of production and more stable and more I would say, more optimized schedules at the mills, thanks to our work with Palantir, we are going to continue to bring this cost down. .
Samuel McKinney : You were very clear last quarter, and you reiterated today that automotive OEMs booking more from Cliffs and those production schedules are tight. Of the 300,000 ton shipment uplift you're looking for in the third quarter, how much of that is from the improved automotive market?
Lourenco Goncalves : I would say half because that's pretty much what we do every quarter have automotive half of nonautomotive as far as light flat-rolled carbon steel.
Samuel McKinney : Okay. And the positive, maybe for also, the positive free cash flow this quarter was more than accounted for by the increase in payables at the end of the second quarter versus the end of the first quarter. Can you provide us some more detail around what drove that spike in payables?
Celso Goncalves : Yes. Sam, it's Payables were largely driven by things like raw materials going up, additional maintenance work and things like that.
Nicklaus Cash : And congratulations also I just wanted to touch on telco in Canada for a second. You mentioned the $500 million potential uplift opportunity here from pricing improvement, cost and volumes. And you mentioned, I think on the last call, the Canadian selling price was at a 40% discount to U.S. price. Based on numbers I've seen recently, it looks like that gap is closed and Canadian prices have moved up actually quite a bit. Is there any chance you'd be able to provide some color on what you're seeing in Canadian spot pricing? And I guess, how much of the $500 million potential uplift is based on today's pricing? Or I guess the the split between pricing and volumes to get to that $500 million?
Lourenco Goncalves : Volume-wise, Nick, we are fine. And we are not -- much better spot volume-wise. We are maxed out. That's still. We are producing what we have to produce. What happened over there is that the pricing gap has closed. The Canadian government made some moves, insufficient moves, but moves in the right direction. So things are getting better, pricing-wise over there, particularly for hot-rolled steel. We haven't seen yet the same type of impact with galvanized over there. That said, we are very comfortable to producing hot band. And we believe that making more hot band to supply the Canadian market is the way to go. If the Canadian market does not understand that galvanize continues to be under pressure and don't -- galvanized is destroying the market, I have used all the arguments I could have used to explain that to them. And look, we are going to do what's good for Cliffs and for the Cliffs' shareholders. So if I need to make any changes in the Canadian footprint will be all affecting urbanized and producing more hot rolled. So -- and that will have a consequence for employment in Canada. But we will have a positive financial impact on Stelco and on Cleveland-Cliffs. But that's not something that we have decided yet. I'm still watching to see what's going to happen. Our guidance is based on what we are booking out in September.
Lawson Winder : Thank you, operator. Good morning, Lorenzo, it's also nice to hear from you both. And then also, congratulations on the promotion. If I could ask on the guidance, just looking further out, if I'm understanding or inferring from some comments you made, Celso. So the Q3 26 and 2027 guidance, is it basically assuming the U.S. HRC forward curve for pricing? And then would that include for the fixed price contract reset? And then just to follow up on that, what assumptions are baked in to unit cost for improvements in Q4 and 2027?
Celso Goncalves : Yes. Lawson, thanks for the comments. Yes, we felt it prudent to give a more detailed guide this time, just given the magnitude of the improvements that we see. But there's nothing crazy being baked in there. Pricing-wise, it's largely just the curve. And then we're assuming the positive benefits that we see from the fixed-price contract renewals and things like that. So it's all very realistic, and we have visibility into it. We know the cost trajectory. We know where pricing is expected to be. And then we have other assumptions like coal, energy and other costs effectively consistent. And we have no reason to think otherwise at this point. So we feel pretty good about the guide.
Lawson Winder : Okay. Yes, that's very helpful. If I could ask then a follow-up on the Q2 results. With free cash flow, there was a real positive working capital benefit, particularly on accounts payable. Could you a little color on what that benefit was about and whether that could be maintained going forward? Or would you expect any reversals going forward?
Celso Goncalves : Yes. So as it relates to working capital, Q2 was a release of around $55 million, and that was driven by a reduction in inventory and a slight build in AP offset by by a little bit of AR. I think we talked a little bit about, as we mentioned, on the reasons that why AP went up. And then going forward, working capital for Q3 is likely going to be a slight build as pricing continues to increase. It's a little too early to tell how significant of a build it could be, but that's what we see going forward into Q3.
William Peterson : So I appreciate all the color thus far on the call. I had a question on the U.S. auto market and realizing you're potentially gaining share and so forth. But considering the announcements from some of your customers to restore, how should we think about your market opportunity in terms of unit volumes in 2027, 2028? And what that means for maybe uplift in terms of your output to capture those increased market size?
Lourenco Goncalves : Yes. Well, we have the capacity. We have the technology and we have the respect of every single client we have. Keep in mind, we got this year, once again, the Supplier of the Year award from General Motors the only steel producer getting this award this year here in the United States. And we also got the international company, Toyota, giving us the same award. I forgot the exact name of the word. It's the top award for that a steel company in a given country can get. So that's the recognition we have from these folks. . So at this point, there is no more conversation who is who. We are #1 peer full stop. We know how to supply automotive. We don't need to help from anyone to help us get better. We are good enough by ourselves. We have the best team to handle the automotive business in the United States under the leadership of [indiscernible]. Between [ Dengue, Mike ] and myself, everybody knows who is who in the automotive business here in the United States. That said, we still have 1 blast furnace in [indiscernible]. And I don't need to explain. Gabon Michigan side the Ford Rouge complex, we are really able to produce automotive steels over there. So we have more capacity to supply automotive. The Trump administration boost that. I shared our potential with the Secretary of Commerce, Howard Lutnick. We support the Trump administration moves to a reshoring manufacturing. They are doing the business of the American people. And we're right behind to make sure that as every single move that they make will be backed by Cleveland-Cliffs and we will be there for them. That's how we work. And that's how we will continue to make money for the shareholders.
William Peterson : I appreciate that comment, Lourenco, maybe following up on the second part of Lawson's questions, just to get a sense of the variables for costs in 2027, potentially, I'm thinking like increased utilization potentially it sounds like raw materials are not expecting any headwinds. Are there any other inflationary thoughts to consider? And maybe on the talent side, you talked about some improvement this year. Do you have line of sight for any cost improvements from your work with them concerning maybe the next to 18 months out? Any additional color would be helpful.
Lourenco Goncalves : Yes. Well, the very first thing is some changes in maintenance practices and move towards higher utilization of our equipment better and more efficient production planning. All these things that are going on inside the company right now, they are starting to bear fruit, and we will continue to see these things impact -- positively impacting our costs. We do have a reline at one of our blast furnace burning [ harbor ] and coming next year. And we're going to get some efficiency gains over there as well. In a much smaller scale, but not less important, we are going to be producing more grain-oriented electrical steels as the -- it's a 25% increase on that plant specifically with the completion of our induction furnaces in the hot [ strip mill ] of [ Butler ]. So -- there's a few things that -- these are a few of the things that we are doing in order to continue to grow our throughput.
Nick Giles : Thank you, operator. and also. My question was about capacity restarts and [ LG ], you just mentioned Dearborn. So what else do you need to see whether, I assume primarily [ Dearborn ] but elsewhere to expand capacity? And then can you just remind us of the volume uplift that could come from any restarts and how you're thinking about capital intensity?
Lourenco Goncalves : Yes. Look, Delta -- that plant is a producer of automotive grade steel. So the more automotive move production to the United States the more we are going to get closer to bring back the [indiscernible]. The more they replace aluminum with steel, which they are doing in a very consistent way since the the competition set themselves on fire and did it again and then again in the last several months. The more they continue to do that, the closer we get there. . And the more they believe that the Trump administration is not going to go back on anything that they are doing so far, and there's absolutely no indication that would happen. I would go one step further. No matter who the next President of the United States to be, any Republican or even a Democrat, I don't see these things being undone. There's no body that will come and say, "Oh, you know what, it's a good thing to import steel from China. Let's go ahead and let China -- go back to their control over the market." President Trump pushed them back, and that was in the first mandate. President by then came and did not change anything, and then President Trump came back and made it a lot better with Section 232. So who is going to come back and say, let's imports into this country? So car manufacturers need to believe that these changes are for real as much they believe that the electric vehicle lie was true. So if they had applied half of their conviction in electrical vehicles to bring -- to restore production to the United States, [ the point ] would be back. And because the [ bond ] is not back, backlogs are tight for them. and I'll keep them tight. But once they move in all earnest out of aluminum into steel and backing our proposal of bringing manufacturing back to the United States, that's basically the proposal of the government of the United States. We're going to have the going back until they do that [indiscernible].
Nick Giles : You understood. I appreciate those comments. Maybe just as a follow-up. As we think about the Dearborn restart, should we think about it hinging on auto improving further? Or could you make a decision to restart that capacity just to increase hot-rolled production, let's say?
Lourenco Goncalves : I thought I was clear. So we are comfortable what we have right now for the situation we are seeing right now. Maybe the clients are not comfortable. They are tight. They are with running on tighter schedule than they would like to see. But there's an easy solution. But they need to give me a conviction that I can bring a blast furnace back as we are talking more than 2 million tons. So I need the conviction that things -- the conviction that this -- they will bring back and they will stay and they are not going to go back to Mexico or back to Canada or importing steel or producing cars in South Korea. I hate all these things. I want them to produce cars into the United States, employee Americans, and then I can employ Americas here in the United States as well. It's so simple. How can we have consumption without employment? We're not going to have that. They need people to buy the car, these people need to have jobs. So that's what we're discussing here. It's a lot less on one side the decisions by the company and much more on a macro level. And I believe that the U.S. government has shown very clear what's going to happen next. So we are ready to go, But we're not going to go until they are ready to go. And I don't feel like they are ready to go. They prefer small increments. That's fine with me. We are showing that we are good at that as well. almost half of my business in flat rolled steel is automotive, there's another half that's really pretty damn good as well. And we are on plate for shipbuilding. We are on electrical steels for the grid, the only producer of grain-oriented electees. We are on stainless, we are on a lot of things that make a lot of money for us as well. So I can go either way. But our footprint is well designed for automotive. Automotive coming, automotive executing, we are right there for them.
Nick Giles : That's very clear. I really appreciate those comments. My second question was just on debt pay down. Obviously, the outlook is improving. And so I was wondering if, based on that outlook, kind of what your expectations are for debt pay down in total over the next few quarters? And how much nonoperating cash flow, the asset sales or any other sources could contribute to that?
Celso Goncalves : Yes. I mean I think we've been pretty clear that debt pay down is going to be our #1 capital allocation priority. And we've sort of laid out how much free cash flow we expect to generate; Nick. So the debt reduction will be consistent with free cash flow generation. The asset sales obviously juice that even further. But until we get to our target, our leverage target, we're not going to prioritize any other type of capital allocation. . And then as you know, we have a balance sheet that we've been very thoughtful about. We've been really proactive on pushing out maturities. We don't have anything maturing until 2029. So there's no immediate kind of refi needed at this point. We have a good ABL in place. So there's nothing urgent on the balance sheet. It's just a matter of delivering on the results, generating the cash and paying down the debt and getting to our target.
Lourenco Goncalves : Nick, just a quick addition to what Celso just said. I usually don't comment on that, but today, I have to. The presentation that is loaded in our website following the Q3 -- I'm sorry, Q2 results every quarter, we put a presentation there. I never comment; the presentation is really good and gives a lot of further information on our path to bring back this leverage to a [ true ] handle in the next year. So I would like to direct not only you, my friend, but everybody else in the call to take a look on that presentation. There's a lot of work there and a lot of information that we are making public through the presentation on our path to bring leverage down in an extremely important way and that will happen in the next year. So please spend a little, 5 minutes there. just to take a look on that because you're going to see that we know exactly how to get there and how to use our cash flow to bring back leverage to a 2-point something x in the next 12 months.
Unknown Analyst : Great. Lourenco, Congratulations. So I wanted to touch on the commentary on the guidance and expectations for 4Q better than -- what's driving that in terms of different buckets? Are you expecting additional price gains, lower costs? And what are your expectations on the volumes because we typically see some seasonality in the fourth quarter? So just curious sort of what's driving the incremental improvement?
Lourenco Goncalves : Yes. Richard, welcome back to the business. How long have we been out of the steel business? because I haven't seen you as we're doing something else. .
Unknown Analyst : Discovering the sector. I was touching the buy side, yes..
Lourenco Goncalves : Oh, you are in the buy side. Okay. Okay. I mean -- welcome back to the sell side. So anyway, Look, we have -- because of the way we sell steel, we have a good visibility into volumes. And with the 2 months, sometimes a 2-month lag, we know what price we're going to be executing. And we also know the volumes and how we're selling to our clients. So that's why we have conviction on Q4 as well as we have conviction on the number that we gave for Q3. Of course, changes are that we're going to get to a number that will be $5 million more, we don't consider that a bit. If you do $5 million less, we are not going to expect you guys to say that we missed our own guidance. So we are guiding to a number because we want to give you what we have in terms of what we see right now. But we have a lot of conviction on what we're seeing for Q3. As far as Q4, we already baked in the fact that around Thanksgiving week, we're going to have less shipments. We also baked in the last week of the year or the last 10 days of the year when business shuts down. So all these things are taken into consideration. We expect that these things will happen. We also -- we are seeing the appetite of the car manufacturers growing. Like I said, growing slowly and probably with a lot more -- not probably. -- with a lot more potential if they apply the conviction to bring business to the United States that they did before when they were convinced themselves that everybody in the United States would buy electric vehicle. So if they apply half of the conviction that they had, we're going to be in a position that we can really bring [indiscernible] back and get it done with a much higher volume and you can produce a lot more cars in the United States and sell more Made-in-USA cars to the American consumer. So by Q4, it's basically what we're seeing right now. So it's good. And we believe that we're going to get what we said we
Unknown Analyst : Okay. No, that's great right to hear. And then maybe just to touch on 2027, I know you talked about non-auto fixed contracts opportunity renewing in 2027. How should we think about that in terms of where they were originally signed? And then what's the price embedded in your $500 million that current pricing that we're seeing? And also just in terms of how we should see that play out through next year, is that going to be a stair step as the contracts get renewed or should we be spread out through 2027?
Lourenco Goncalves : Very first thing, the pricing levels that were -- the prevailing prices, underlying prices, during the time that [ Mike Kuni and Mike Hirose ] were renewing our contracts with our clients last year, we're in the $800 level, maybe less Today, they are in the [ 1,150 ] level or maybe more. So the starting point of negotiation has moved up a lot. And the clients know at this point that there is no chance that they can go ahead and harasses with imported steel. "Oh if you don't buy from me, I'm going to import." So be my guess going on. We'll get the vessel through the street of [ Olmos ]. So for example, or bring it from Ukraine. So it's not going to happen. So we are not going to use that to make our clients less profitable. Actually, I have a full conviction based on my 45 years of experience in this business, that higher prices benefit everybody, not just the [ muse ] but the service centers, the OEMs, everybody. We just can't keep our business alive by forcing that business to produce and sell the product below cost. That's a recipe for disaster. On the other hand, we are not greedy, we're just realistic. We need to make a return on investment that we make in order to supply these clients and keep them in good health, financial health as well as our own financial health. So that's what we expect this negotiation to be more of a mature negotiation between business that understands the good dependence and understand that there is no such a way that can take money out of my pocket and be happy, and we're going to be happy as well. We're going to be happy and we are happy because we're making money, and we'll also be happy because they are happy because they are making money. That's the beautiful backdrop that we're going to be negotiating with.
Operator : Thank you so much. Ladies and gentlemen, this does now conclude the question-and-answer session. With that, I would like to bring the call to a close. We appreciate your participation. You may disconnect your lines at this time, and enjoy the rest of your day.
